Specifications

Roof and Ceilings (1)

• 6" aluminum facia
• Vinyl soffit
• 36" rubber membrane
• Ice shield and water shield
• 15 lbs felt paper
• 25 year shingles (nailed)
• 1/2" plywood
• Engineer approved roof trusses at 24" c/c
• Engineered beam where needed
• 6/12 standard roof pitch up to 12/12
• Blown insulation
• 1 x 4 strapping at 16" c/c
• Vapor barrier type 1 (polyethylene .006)
• 1/2" sheetrock screwed
• blueboard available in option

---

Walls (2)

Exterior Walls

• Vinyl siding
• Wind barrier (Tyvek)
• 1/2" plywood
• R-20 fiberglass insulation
• 2 x 6 at 16" c/c
• Vapor barrier type-1 (polyethylene .006)
• Horizontal strapping 1 x 3 at 16" c/c
• 1/2" sheetrock screwed
• Blueboard available in option
• Colonial trims (stain grade)

Middle Wall (connection of sections)

• 2- 1/4" OSB
• 2- 2" x 4" at 16" c/c
• 1/2" sheetrock screwed
• Blueboard available in option
• Colonial trims (stain grade)
• 6" x 2" insulation at perimeter of middle wall

Interior Partitions

• 2" x 4" at 16" c/c
• 1/2" sheetrock screwed (blueboard available in option)
• 1/2" waterproof sheetrockaround tub and shower

---

Floor (3)

• Columns in basement
• Middle beam: 6- 2" x 10", bolted
• Perimeter beam: 2- 2" x 10"
• Engineered "I" beams (silent floor)
• Metal hangers at junction of central beam and floor joists
• Styrofoam insulation around perimeter
• 3/4" plywood, tongue and groove, glued and screwed*

All windows low-E glass
* 100% plywood, 3/4" plywood on floor (silent floor), 1/2" plywood on exterior wall & 1/2" plywood on roof.

---